日本SMC壓力開關安裝方法

日本SMC壓力開關安裝方法

The settings of the master sensor can be copied to the slave sensors,
reducing setting labor and minimizing risk of mistakes in setting.
Can copy to up to 10 switches simultaneously.
(Maximum transmission distance 4 m)

主傳感器的設置可以被復制到從傳感器
減少設置勞動和盡量減少環境中的失誤風險。
可同時復制到多達10個開關。（zui大傳輸距離4米） 

日本SMC壓力開關安裝方法

1) The sensors are connected by a dedicated lead wire
(ZS-38-5L (for master and one slave) or ZS-38-U (for
master and up to 10 slaves)). Copying is performed
through a dedicated communication line.
2) Select the slave switch which is to be the master, and
change it into a master using the buttons. (In the default
setting, all switches are set as slaves.)
3) Press the button of the master switch to start
copying.

1）的傳感器由一個的引線連接
（ZS-38-5L（碩士和一個從）或ZS-38-U（用于
主站和zui多10個從站））。復制的執行
通過通信線路。
2）選擇從交換機是成為高手，
它改成使用按鈕的高手。 （在默認
設定，所有開關都設置為奴隸。）
3）按總開關的按鈕啟動復制